新しいMercedes-Benz Sprinter 316 Box Type Ambulance 救急車

It is possible to make cased type ambulance from different brands such as Iveco, Ducato, Citreon.

Mercedes Box Type Ambulance: Mercedes sprinter chassis is manufactured by adding a box onto the ambulance. It can be produced as both emergency helping or patient transferring. A box, which is made from sandwich panels, is installed onto the ambulance chassis. The profile thickness used in the case is 25mm. It is possible to reach the oxygen and stretcher group from out of the ambulance via an explicit cupboard. There is a stretcher carrying platform, which has a movement among the left and right sides. Also, there is a ramp in order to help stretcher to get out of the ambulance easily. There are defibrillator and ventilator devices in the ambulance.

Mercedes Box Type Ambulance Case

It is produced from polyurethane material. There is a Mercedes Box Type Ambulance toolbox set, located in clamps which can be easily open, which is proper for the use of an ambulance in the patient cabinet. There are fire extinguishers, oxygen extinguishers, and urgent helping kits in this set. Also, there is a wedge in order to prevent the vehicle to slip while it is parked. There is a medical waste box, produced from stainless steel, which is located near the patient stretcher’s head part in the patient cabin. Also, here is a syringe waste box on the medical waste box.

There is an area (which contains plastic medicine and an organ transport bag produced from hygienic material. These bags can be used by putting coolers in it.) in order to store the vacuum stretcher located in the backside of doctors’ seat in the patient cabin. Also, there is a patient transport Brenda which has 2 meters of 80 centimeters measures in order to facilitate carrying a patient or corpse in the vacuum stretcher part. This Brenda is covered with flame delayer material. There are 4 or 6 transport handles in order to carry it easily on the edge of the Brenda.

There are two different systems in order to light the patient cabin. There are 4 or 6 long lamps that have LEDs inside them. These lamps have day and night mode which can be easily controlled from the control panel based on the patient cabin. There are 3 or 4 white LEDs with chips in the lamps.

There are an audible siren and lighting system out of the ambulance. Also, polyester-based cladding headlamps can be installed in case it is asked for.